Mantotherm Dekominera Grain Texture

• Poses high performance, prevents the formation of cracks and spalling thanks to the fibers in its content.
• Provides the structure with a natural and decorative appearance.
• Resistant to outdoor weather conditions, and such weather conditions as rain, snow, excessively high or low temperatures.
• It has high water vapor permeability.
• Resistant to water and frost and is water repellant.
• Exterior paint must be applied on it. • Prepared and applied easily.

Usage Areas

• Mantotherm Dekominera – Tane Dokulu can be safely applied as the finishing coat on cement based fine plaster or thermal insulation systems in outdoors spaces. The product is also suitable for use on interior walls for decorative purposes.
  

  ---

  Technical Informations

  • PerformanceGloss Class G3 TS 4318 EN ISO 2813
    Dry film thickness Class E5 TS EN 1062 – 1
    Grain size Class S4 TS 2585
    Water vapor transmission rate Class V2 TS EN ISO 7783 – 2
    Water transmission rate Class W2 TS EN 1062 – 3

    The foregoing values represent the results of the laboratory tests conducted at 23 ± 2°C temperature and 50% ± 5 relative humidity conditions. The values provided as per the table may vary depending on the surface and ambient conditions.

    Application LimitsUseful time for prepared mortar – Pot life Maximum 2 hours
    Pattern design Maximum 10 minutes

    The foregoing values represent the results of the laboratory tests conducted at 23 ± 2°C temperature and 50% ± 5 relative humidity conditions. The values provided as per the table may vary depending on the surface and ambient conditions.

    Technicial Specificationsa. Chemical Structure: White cement based decorative coating, containing fiber and water repellant additives
    b. Dry Density: 1.65 ± 0.1 gr/cm³
    c. Mortar Density: 1.80 ± 0.1 gr/cm³
    d. Grain Size: ≤ 2000 µm
    e. Coat Thickness: Maximum 2.5 mm
    f. Color: White

    Mixing RatioThe product should be mixed with water, weighing equal to 22 – 24 % of the product. (5.5 – 6.0 liters of water for a 25 kg package)

    ConsumptionRecommended consumption amount for application on 1 m² surface is 3.0 – 3.5 kg. The said value may vary, depending on the surface and ambient conditions.

    PackagingMantotherm Dekominera – Grain Texture is delivered in net 25 kg craft bags, which are stowed in 54 pcs. on 80 cm x 100 cm palettes (1350 kg).

    Reference Standardsa. Certifications / Standards
    TS 7847
    b. Ministry of Public Works and Settlement Item No.
    Ministry of Public Works and Settlement Item No.: 10.300.1353

    c. Quality Certificates
    TSE
    G

    ---

    Application Procedure

    • Application Surfaces
      Indoors and Outdoors Walls;
      Fine plastered surfaces (Mantotherm Primer applied.)
      Thermal insulation systems (Mantotherm Primer applied.)

      Surface Preparation :
      • Mantotherm Dekominera – Grain Texture should be applied minimum 12 hours after the application of Mantotherm Primer application on such floors, on which Mantotherm Plaster Mortar or MegaSıva Thermo prior to such primer application.

      Application Methods :
      • The homogenous mixture to be prepared should be applied to the surface smoothly and properly with a stainless steel trowel.
      • Any surplus material should be peeled off the surface during the application in order to ensure a homogenous and smooth surface.
      • Once the decorative coating is applied homogenously on the application surface, the pattern design should be performed within 10 minutes at maximum.
      • Design patterns should be created with a plastic trowel on the surface by way of circular motion in order to create the grain texture. The surface of the trowel should be peeled off frequently during the pattern design.

      Application Recommendations :
      • The painting application should not be initiated before minimum 7 days following the mineral based grain texture decorative coating application.
      • The product should, once mixed, be used before the expiration of its pot life. Any mortar, the pot life of which has expired, should not be used during the application.
      • Any such foreign substance as lime, cement or plaster should not be added to the mortar prepared.
      • Any extra water should not be added to the mixture.
      • The surface should, subsequent to application, be protected from water and frost until it dries completely.
      • The product should not be applied to such surfaces, which are exposed to risk of freezing within the next 24 hours, which are frozen or the frost of which is thawing.
      • Due care should be taken to ensure that the material is not exposed to direct sunlight in hot weather conditions, and the product should be mixed with cold water.
      • The product should not be applied on extremely windy weather conditions or on hot surfaces, which are exposed to direct sunlight; and in the cases, where application is imperative under such conditions, the environment and the surface should be prepared for application in advance.
      • The product should not be applied in rainy weather conditions, and the application surface should be preserved from rain for a period of 24 hours.
      • Refer to our technical support hotline for recommendation on different surface applications. (PHONE: 444 4 595)

      Surface and Ambient Temperature
      The surface and ambient temperature should be between +5°C and +30°C whilst at application.