MegaFilm Visko A203

• “GEV EC1 Plus” certified and is an environmentally friendly product.
• In the case of ceramic on ceramic applications, the product is applied as binder and ensures the adhesion of the new coating materials, eliminating the requirement of the breakage of the former ceramic surface.
• Prevents the wastes that would have emerged as a consequence of the former ceramic surface.
• An economically efficient product and saves workmanship costs.
• Enhances the surface adherence of the material to be applied subsequently on glassy surfaces.
• A ready to use product which is applied easily and rapidly.
• Free from solvents, and environmentally friendly.

Usage Areas

MegaFilm Visko is used for surface preparation purposes before the adhesion of the coating materials to be applied subsequently on such glassy surfaces as ceramic and mosaic and on wooden based surfaces. It is suitable for use on indoors and outdoors horizontal and vertical surfaces.

Technical Informations

• Reference Standardsa. Certifications / Standards
  TSE K 208
  b. Ministry of Public Works and Settlement Item No.
  Ministry of Public Works and Settlement Item No.: 04.466/3

  ---

  Application Procedure

• Application Surfaces
  Indoors and Outdoors Walls;
  Ceramic coating
  Glassy surfaces
  Mosaic
  Wooden
  Indoors and Outdoors Floors;
  Ceramic coating
  Glassy surfaces
  Mosaic

  Surface Preparation :
  • The application surface should be dry, clean, sound and dust free, and should have been cleansed of oil, dirt or any materials that may prevent adhesion, and any such materials as mortar and cement residues should be scraped from the application surface.

  Application Methods :
  • MegaFilm Visko is used without being thinned. The product should be mixed until a homogenous mixture is obtained prior to use. The product should be applied to the surface homogenously with a brush or roller.

  Application Recommendations :
  • The product should be kept homogenous by, where necessary, stirring it intermittently during the application.
  • The product should, once mixed, be used before the expiration of its pot life. Any product, the pot life of which has expired, should not be used during the application.
  • MegaFilm Visko is a ready to use product. Any foreign material should not be added into the product during the application.
  • The product should not be diluted into the water was added.
  • The product should not be applied on unsound surfaces. The soundness and the load bearing capacity of old surfaces should be checked prior to adhesion.
  • The surface should be preserved from air currents and water contact during the application.
  • The product should not be applied to such surfaces, which are exposed to risk of freezing within the next 24 hours, which are frozen or the frost of which is thawing.
  • Due care should be taken to ensure that the material is not exposed to direct sunlight in hot weather conditions, and the product should be mixed with cold water.
  • The product should not be applied on extremely windy weather conditions or on hot surfaces, which are exposed to direct sunlight; and in the cases, where application is imperative under such conditions, the environment and the surface should be prepared for application in advance.
  • The product should not be applied in rainy weather conditions, and the application surface should be preserved from rain for a period of 12 hours.
  • Refer to our technical support hotline for recommendation on different surface applications. (PHONE: 444 4 595)

  Surface and Ambient Temperature
  The surface and ambient temperature should be between +5°C and +35°C whilst at application.