Megaİzo Kristalize S106

• Fit for contact with drinking water.
• Provides the surface with resistance to both negative and positive water pressure.
• Easily settles into capillary cracks, fills such cracks, forming a crystal structure, and so ensures waterproofing.

Usage Areas

• Megaİzo Kristalize is used for negative and positive waterproofing of sound concrete surfaces in independent swimming pools, sewage and waste water treatment plants, basements, water tanks, elevator shafts, warehouses and parking garages.<0} {0>İç ve dış mekanlarda, yatay ve düşey yüzeylerde kullanılır.<}100{>It is suitable for use on horizontal and vertical surfaces of indoors and outdoors spaces
  

  ---

  Technical Informations

  • Reference Standardsa. Certifications / Standards
    • TS EN 1504 – 2
    b. Ministry of Public Works and Settlement Item No.
    Ministry of Public Works and Settlement Item No.: 04.477/2

    ---

    Application Procedure

    • Application Surfaces
      Indoors and Outdoors Walls;
      Cement based plaster
      Concrete
      Indoors and Outdoors Floors;
      Cement based plaster
      Concrete

      Surface Preparation :
      The application surface should be dry, clean, sound and dust-free, and should have been cleansed of oil, dirt or any materials that may prevent adhesion, and any such materials as mortar and cement residues should be scraped from the application surface.
      Such surfaces as concrete and cement based plaster should be moisturized carefully with clean water immediately before the application
      The application should be started after the drainage of the surface water and due care must be taken to make sure that the application surface is moist, not wet.

      Application Methods :
      Megaİzo Kristalize is applied on the moisturized surface with a brush, which should be over saturated with water, in double coat.
      Once the primary coat thoroughly dries, the secondary coat should be applied as perpendicularly to the primary coat.
      Following the application, the product should be moisturized for 5 days in order for the product to penetrate into the surface.
      In the cases, where a subsequent coat application is to be performed 12 hours later or after a longer period of time, the surface should moisturized again prior to application.

      Application Recommendations :
      The product should not be applied to the surfaces exposed to pressure and non pressure water.
      The product package should be kept closed during the rest breaks in application in order to prevent the product from freezing.
      Due care must be taken to ensure that the insulation material is not damaged by mechanical impacts in the cases of coating over the insulation.
      The product should not be applied against negative water pressure.
      The application surface should be smoothed and inclined adequately to prevent water accumulation.
      The product should, once mixed to homogenous consistency, be used before the expiration of its pot life. Any product, the pot life of which has expired, should not be used during the application.
      Megaİzo Lastik 6 is a ready to use product. Any foreign material should not be added into the product during the application.
      The product should not be applied on unsound surfaces. The soundness and the load bearing capacity of old surfaces should be checked prior to application.
      The surface should be protected from air currents during and after the application.
      The product should not be applied to such surfaces, which are exposed to risk of freezing within the next 24 hours, which are frozen or the frost of which is thawing.
      Due care should be given to prevent the exposure of the material to direct sunlight in hot weather conditions.
      The product should not be applied on extremely windy weather conditions or on hot surfaces, which are exposed to direct sunlight; and in the cases, where application is imperative under such conditions, the environment and the surface should be prepared for application in advance.
      The product should not be applied in rainy weather conditions, and the application surface should be preserved from rain for a period of 24 hours.
      Refer to our technical support hotline for recommendation on different surface applications. (PHONE: 444 4 595)

      Surface and Ambient Temperature
      The surface and ambient temperature should be between +5°C and +30°C whilst at application.