MegaSıva Thermo H110

• Poses high level of adherence on the thermal insulation panels thanks to the special additives in its content.
• Prevents condensation and winds the system thanks to its high vapor permeability.
• Prevents the formation of cracks and spalling thanks to the fibers in its content.
• Prepared and applied easily.

Usage Areas

• MegaSıva Thermo is used as the surface plaster on such thermal insulation panels as XPS, platinum, EPS and rockwool in indoors and outdoors spaces of all buildings.
  

  ---

  Technical Informations

  • Reference Standardsa. Certifications / Standards
    TSE K 113 (GP)
    b. Ministry of Public Works and Settlement Item No.
    Ministry of Public Works and Settlement Item No.: 04.481

    ---

    Application Procedure

    • Application Surfaces
      Indoors and Outdoors Walls;
      XPS
      EPS
      Platinum
      Rockwool

      Surface Preparation :
      • The application surface should be dry, clean, sound and dust free, and should have been cleansed of oil, dirt or any materials that may prevent adhesion, and any such materials as mortar and cement residues that impair the surface smoothness should be scraped from the application surface.
      • When used as leveling plaster; the surface defects, which are deeper than 1 cm, should be repaired with MegaTamir İ or MegaTamir K 24 hours in advance. In the cases, where structural repair mortar should be used; MegaTamir İ Yapısal or MegaTamir K Yapısal should be preferred.

      Application Methods :
      • MegaSıva Thermo should be applied with a steel trowel in equal thickness on all surfaces.
      • Donatı Filesi should, following the application of the primary coat of MegaSıva Thermo, be placed into the plaster by stretching the mesh thoroughly and applying slight pressure thereon from top to bottom, preventing any foldings.
      • The joints of Donatı Filesi should be superpositioned by 10 cm in order to prevent the formation of cracks. In the event the corner profiles are mesh free; the glass fiber mesh should be turned by minimum 20 cm on the corners.
      • The primary coat with mesh should be let dewater slightly before the application of the secondary coat.
      • The surface will have become ready for the finishing coat applications minimum 7 days after the secondary coat plaster application.

      Application Recommendations :
      • Any such foreign substance as lime, cement or plaster should not be added to the mortar prepared. • The product should, once mixed, be used before the expiration of its pot life. Any product, the pot life of which has expired, should not be used during the application.
      • Any such foreign substance as lime, cement or plaster should not be added to the mortar prepared.
      • Any extra water should not be added to the mixture.
      • The product should not be applied on unsound surfaces. The soundness and the load bearing capacity of old surfaces should be checked prior to adhesion.
      • The surface should be preserved from air currents and water contact during and after the application.
      • The product should not be applied to such surfaces, which are exposed to risk of freezing within the next 24 hours, which are frozen or the frost of which is thawing.
      • Due care should be taken to ensure that the material is not exposed to direct sunlight in hot weather conditions, and the product should be mixed with cold water.
      • The product should not be applied on extremely windy weather conditions or on hot surfaces, which are exposed to direct sunlight; and in the cases, where application is imperative under such conditions, the environment and the surface should be prepared for application in advance.
      • The product should not be applied in rainy weather conditions, and the application surface should be preserved from rain for a period of 24 hours.
      • Refer to our technical support hotline for recommendation on different surface applications. (PHONE: 444 4 595)

      Surface and Ambient Temperature
      The surface and ambient temperature should be between +5°C and +30°C whilst at application.