Mantotherm Adhesive Mortar

• Does not cause slippage in the case of vertical applications.
• Ensures high level of adherence and strength in application.
• Resistant to water, frost and temperature changes.
• Prepared and applied easily.

Usage Areas

• Mantotherm Yapıştırma Harcı is used for the adhesion of such thermal insulation panels as XPS, EPS, Platinum and Rockwool in indoors and outdoors spaces of all buildings.
  

  ---

  Technical Informations

  • Reference Standardsa. Certifications / Standards
    TS 13566
    b. Ministry of Public Works and Settlement Item No.
    Ministry of Public Works and Settlement Item No.: 10.330.2503

    Kalite Belgeleri:
    • TSE
    • G

    ---

    Application Procedure

    • Application Surfaces
      Indoors and Outdoors Walls;
      Concrete (MegaFilm or MegaFilm BB primer applied)
      Gas concrete (MegaSıva K applied)
      Hollow brick (MegaSıva K applied)
      Briquette (MegaSıva K applied)

      Surface Preparation :
      • The application surface should be dry, clean, sound and dust-free, and should have been cleansed of oil, dirt or any materials that may prevent adhesion, and any such materials as mortar and cement residues that impair the surface soundness and smoothness should be scraped from the application surface.
      • The surface defects, which are deeper than 2 cm in, should be repaired with MegaTamir İ or MegaTamir K 24 hours in advance. In the cases, where structural repair mortar should be used; MegaTamir İ Yapısal or MegaTamir K Yapısal should be preferred.

      Application Methods :
      • In the case of surface skewness, Mantotherm Yapıştırma Harcı should be applied continuously along the four edges of the thermal insulation panel, and in three piles in the middle of the panel. Due care must be taken to prevent the adhesive to overflow to the edges of the panel.
      • In the cases, where the surface is fairly smooth, Mantotherm Yapıştırma Harcı should be applied by chiseling on the reverse side of the panel with a 10 x 10 notched trowel.
      • Due care must be taken to ensure that Mantotherm Yapıştırma Harcı does not form a film layer on the surface during the application. The thermal insulation panels adhered with Mantotherm Yapıştırma Harcı should be fixed with dowels minimum 24 hours after the application of the adhesive mortar, and should, subsequently, be applied Mantotherm Sıva Harcı.

      Application Recommendations :
      • The product should, once mixed, be used before the expiration of its pot life. Any mortar, the pot life of which has expired, should not be used during the application.
      • Any such foreign substance as lime, cement or plaster should not be added to the mortar prepared.
      • Any extra water should not be added to the mixture.
      • The product should not be applied on unsound surfaces. The soundness and the load-bearing capacity of old surfaces should be checked prior to adhesion.
      • The surface should, subsequent to application, be protected from water and frost until it dries completely.
      • The product should not be applied to such surfaces, which are exposed to risk of freezing within the next 24 hours, which are frozen or the frost of which is thawing.
      • Due care should be taken to ensure that the material is not exposed to direct sunlight in hot weather conditions, and the product should be mixed with cold water.
      • The product should not be applied on extremely windy weather conditions or on hot surfaces, which are exposed to direct sunlight; and in the cases, where application is imperative under such conditions, the environment and the surface should be prepared for application in advance.
      • The product should not be applied in rainy weather conditions, and the application surface should be preserved from rain for a period of 24 hours.
      • Refer to our technical support hotline for recommendation on different surface applications. (PHONE: 444 4 595)

      Surface and Ambient Temperature
      The surface and ambient temperature should be between +5°C and +30°C whilst at application.