MegaAntiFreeze 10 K901

• Enhances the resistance of mortar and concrete against frost.
• Improves the early strength of concrete or mortar in cold weather condition or against the impact of frost.
• Free from chloride, and does not harm the concrete or the reinforcement.
• Shortens the mold removal and workmanship time in cold weather conditions.

Usage Areas

• MegaAntiFreeze 10 is suitable for use as anti-freeze for all cement mortars and concrete in cases, where frost is expected, in constantly cold weather conditions, in such conditions, where mild frost is at issue throughout the day, in such cases, where sudden temperature drops are likely.
  

  ---

  Technical Informations

  • Technicial Specificationsa. Appearence/Color: Liquid/Yellow
    b. Density: 1,12 ± 0,02 gr/cm³
    c. pH: 5 – 6
    d. Freezing Point: -10°C

    Reference Standardsa. Certifications / Standards
    ASTM C – 494 Type C
    TS EN 934 – 2
    b. Ministry of Public Works and Settlement Item No.
    Ministry of Public Works and Settlement Item No.: 04.613/7

    ---

    Application Procedure

    • Application Surfaces
      MegaAntiFreeze 10 should be added to the water used for mixing the concrete or mortar.

      Surface Preparation :
      The product does not require any surface preparation.

      Application Methods :
      • MegaAntiFreeze 10 should be added along with the mixing water or subsequent to the mixing.
      • The Product should be added to the mixing water in such mass that weighs equal to 1% of the cement’s weight. When added directly to the concrete, the mixing time should be elongated for 2 to 3 minutes.

      Application Recommendations :
      • Any snow, ice and frost should be completely removed from the zone, where the concrete or the mortar is to be placed.
      • The mixing instruction for the product should be followed. The product should not be added directly to the cement.
      • The compounds within the concrete or the mortar should be preserved from the impacts of frost.
      • Due care should be taken to ensure that the difference between the temperature of surfaces, to which the concrete or the mortar is to contact, and the temperature of the mortar applied is not excessively high. The temperature of the concrete or the mortar should be increased by heating the application zone in cases, where necessary.
      • Refer to our technical support hotline for recommendation on different surface applications. (PHONE: 444 4 595)

      Surface and Ambient Temperature
      The surface and ambient temperature should be between +5°C and +15°C whilst at application.