Megaİzo Lastik 3 S903

• Penetrates into the capillary cracks on the application surfaces thanks to its impregnated nature and ensures waterproofing.
• It ensures the surface to be resistant against water pressure which applies in negative and positive ways. (≤ 1 bar)
• It makes positive contribution to chemical strength and abrasion resistance of the application surface.
• It reduces dusting behaviour of the application surface.
• UV resistant.
• A ready to use product, and is applied easily and rapidly.
• Free from solvents, and environmentally friendly.

Usage Areas

• MegaIzo Lastik 3 is recommended for leaking problems that may arise due to capillary cracks of joint sealants in the decorative pools, swimming pools, terraces and balconies, floor covered with natural stone, walls and floors covered with clay and brick, any kind of concrete surfaces and floors. It is suitable for use on horizontal and vertical surfaces of indoors and outdoors spaces.
  

  ---

  Technical Informations

  • PerformanceTYPE: (H) Hydrophobic impregnated product

    Capillary water absorption and water absorbance: ˂ 0.1 kg/m².h0.5 (EN 1062 – 3)
    Penetration depth: ≥ 0,5 mm (TS EN 1504 – 2)

    The foregoing values represent the results of the laboratory tests conducted at 23 ± 2°C temperature and 50% ± 5 relative humidity conditions. The values provided as per the table may vary depending on the surface and ambient conditions.

    Application LimitsUseful time for product – Pot life: Maximum 3 hours
    Drying time:40 – 50 minutes

    The foregoing values represent the results of the laboratory tests conducted at 23 ± 2°C temperature and 50% ± 5 relative humidity conditions. The values provided as per the table may vary depending on the surface and ambient conditions.

    Technicial Specificationsa. Chemical Structure: Silane and siloxane based, liquid hydrophobic impregnated waterproofing material
    b. Density: 1.00 ± 0.05 gr/cm³
    c. pH: 12 – 13
    d. Color: Transparent

    Mixing RatioMegaIzo Lastik 3 S903 is a ready to use product.

    Reference Standardsa. Certifications / Standards
    • TS EN 1504 – 2
    b. Ministry of Public Works and Settlement Item No.
    Ministry of Public Works and Settlement Item No.: 04.472/3

    ---

    Application Procedure

    • Application Surfaces
      Indoors and Outdoors Walls;
      Ceramic
      Natural rock
      Clay
      Brick
      Concrete
      Indoors and Outdoors Floors;
      Ceramic
      Natural rock
      Clay
      Brick
      Concrete

      Surface Preparation :
      Application surfaces should be sound, clean, dust free, and free from molding oils and other foreign substances. Such materials as mortar and cement residues should be peeled off.

      Application Methods :
      MegaIzo Lastik 3, being a ready to use product, should be applied on the surface in double coat with a brush or a roller.
      The secondary coat should be applied immediately after the completion of the primary coat without any stand by period.

      Application Recommendations :
      In order for the maintenance of the water repellant nature of the material, the application is recommended to be repeated in every 2 years, depending on the extent of the wear and tear.
      In order to prevent any stain residues on the coating material after the application in the case of surfaces with poorly water absorption (ceramic, porcelain, granite); the surface should be wiped with a moist cleaning cloth or sponge within 10 to 15 minutes following the application, during which the cloth or sponge used should be replaced frequently.
      The product should not be applied against negative water pressure.
      The product should be used before the expiration of its pot life. Any product, the pot life of which has expired, should not be used during the application.
      MegaIzo Lastik 3 is a ready to use product. Any foreign material should not be added into the product during the application.
      The product should not be applied on unsound surfaces. The soundness and the load bearing capacity of old surfaces should be checked prior to adhesion.
      The surface should be preserved from air currents and water contact during and after the application.
      The product should not be applied to such surfaces, which are exposed to risk of freezing within the next 24 hours, which are frozen or the frost of which is thawing.
      Due care should be given to prevent the exposure of the material to direct sunlight in hot weather conditions.
      The product should not be applied on extremely windy weather conditions or on hot surfaces, which are exposed to direct sunlight; and in the cases, where application is imperative under such conditions, the environment and the surface should be prepared for application in advance.
      The product should not be applied in rainy weather conditions, and the application surface should be preserved from rain for a period of 24 hours.
      Refer to our technical support hotline for recommendation on different surface applications. (PHONE: 444 4 595)

      Surface and Ambient Temperature
      The surface and ambient temperature should be between +5°C and +30°C whilst at application.