MegaZemin BYS Z121

• Enhances the concrete strength thanks to its quartz content.
• Enhances the abrasion and impact resistance of concrete.
• Reduces the water absorption of concrete.
• Prevents dusting on the concrete thanks to its special composition.
• Provides an aesthetically good appearance for the floor with the range of colors, in which it is delivered.

Usage Areas

• MegaZemin BYS is used for any and all such spaces as warehouses, factories, restaurants and shopping malls, which require high abrasion resistance and where dusting should be prevented. It is suitable for use on horizontal and vertical surfaces in indoors and outdoors spaces.
  

  ---

  Technical Informations

  • Reference Standardsa. Certifications / Standards
    • TSE
    b. Ministry of Public Works and Settlement Item No.
    Ministry of Public Works and Settlement Item No.: 04.613/3F04 (Gray), 04.613/3F05 (Red), 04.613/3F06 (Green)

    ---

    Application Procedure

    • Application Surfaces
      Indoors and Outdoors Floors;
      Fresh concrete

      Surface Preparation :
      • The surface should be robust, dense and should have been properly finished prior to application.
      • The load-bearing concrete of the application surface should be class C25.
      • Soft spots, bulges, dust, dirt, such materials as construction residues should be cleaned from the surface before the casting of the concrete.

      Application Methods :
      • In order to establish whether or not the floor is ready for the application of MegaZemin BYS following the surface finished in the case of fresh concrete, one should strongly press his/her thumb on the concrete surface. If such pressure causes a trace in some 3 to 5 mm depth on the surface, then the surface is read for application.
      • Roughly 2/3 of MegaZemin BYS should be spread on the surface, homogenously.
      • Once the spreading is complete, the surface should be let rest for MegaZemin BYS to gather moisture.
      • The material should be rubbed into the surface with a low cycle rotary float (mechanical trowel) and be so ensured to integrate with the concrete.
      • The remaining material should, then, also be rubbed into the surface, which should thereafter be finished.
      • Once the surface hardens to such extent that it allows to be walked thereon, the final finishing should be performed by high cycle finishing.
      • Once the surface hardening application is complete, MegaZemin Kür, our surface curing agent, in order to prevent the formation of contraction cracks and dusting.

      Application Recommendations :
      • Due care should be given to prevent the exposure of the material to direct sunlight in hot weather conditions.
      • The product should not be applied on extremely windy weather conditions or on hot surfaces, which are exposed to direct sunlight; and in the cases, where application is imperative under such conditions, the environment and the surface should be prepared for application in advance.
      • The product should not be applied in rainy weather conditions, and the application surface should be preserved from rain for a period of 24 hours.
      • Refer to our technical support hotline for recommendation on different surface applications. (PHONE: 444 4 595)

      Surface and Ambient Temperature
      The surface and ambient temperature should be between +5°C and +35°C whilst at application.